1 Minute Read:
Troubleshooting a Defective Solenoid in a 48 Volt Club Car
If your 48 Volt Club Car is having solenoid issues, don’t worry, we’ve got you covered. Follow these steps to troubleshoot and replace a defective solenoid:
- Verify that the charger is working properly.
- Ensure the charger is plugged into a working outlet and that the fuse is intact.
- Bypass the On-Board Computer (OBC) by connecting a jumper wire from the negative terminal of the battery pack to the black and gray wires on the receptacle.
- Check the solenoid.
- While pressing the accelerator pedal, measure the voltage across the blue and blue/white wires.
- No voltage could indicate a defective solenoid.
- Check the solenoid coil with an ohmmeter to see if it has an open circuit.
- Replace the solenoid.
- Once you’ve confirmed the solenoid is defective, replace it with a new one.
- Ensure the new solenoid is installed correctly.
Additional Tips:
- Before replacing the solenoid, use an ohmmeter to check the voltage across the solenoid coil.
- Be sure to install the new solenoid correctly to avoid further issues.
- If you are not comfortable troubleshooting the solenoid yourself, consult a qualified technician.
By following these steps, you can troubleshoot a defective solenoid in a 48 Volt Club Car and get your cart up and running again.